Below are the fundamentals to guarantee the correct installation of fire doors.
The door frames must be installed and should be correctly tested model specifications.
The doorsill on the opening of the door must be produced using non-combustible material such as concrete.
The space between the frame at the head and stiles as well as the door must not be more than 3mm. The space between the floor to the door must not go beyond 10mm. But when you feel that it is impractical to follow these rules, then you may consult with your licensed door inspector.
All the hardware which is fitted to the door, such as the locks, closers and others, must be tested as well as approved. In the event you are having doubts regarding your door hardware, it is best to consult a representative.
Do not trim more than 6mm from the edges of the door. But if more trimming is required, you will then need to customize the door.
Extra caution must be done to ensure that the door is hung the correct way. Fire doors which have an E Core have supporting plates that are prepared particularly in the door to accommodate locks, hinges, as well as door closers. At the top hinge stile of the door, the words “top hinge” as well as the fire rating of the door should be stamped.
You can make use of self-tapping screws for the proper fixing of the door leaf to the closer and hinges. A hole must be available in the door before you fasten the screws.
A minimum of 127mm back set will be required when using knob handles with certified locksets.
After the installation, all doors must have the required metal tags attached and certified to the Australian Standards. It is important to remember that certification does not have the sale price of the doors.
Neglecting to adhere with the regulations above may deem your door non-compliant to Australian laws building laws. Certification will not be issued and the warranty will be considered void. If you will need more assistance, do not hesitate to consult a certified fire door installer near you. Remember that these regulations are only used on side hung hinged fire doors. There are other rules set for sliding doors, two swing doors, and others.